DFW's Largest Custom Sign Company

We always space fluorescent lighting tubes, and HID lighting, 25% closer than virtually all other sign manufacturers, much closer than the "cheap" manufacturers, to insure a bright sign.

Our goal is to get a potential customer to notice your sign first; rather than look at someone else’s sign and never notice yours.   When you use electricity it should attract customers.

Signs Manufacturing™ uses Solar Finishes™ "Bright Reflective White" paint inside every cabinet sign we produce to increase the apparent light output of fluorescent, HID, neon and LEDs by 100%, and even light distribution. 

As a lighting alternative Signs Manufacturing™ offers Tri-phosphor fluorescent lamps which increase the light output of sign cabinets by an additional 25%, increase the lamp-life 5-fold (60,000 hours), and use less energy than LEDs to create a similar result while costing less!

Lamp life is especially important in pole and pylon signs, where the cost of labor and vehicles to change a lamp is many, many times the cost of the lamp!

These products incorporated into your new sign will make your sign significantly brighter than all other signs in the area when lighted.  Potential customers will see your sign first so it is the one that will make the strongest impression!

Make sure you have witnessed our demonstration of sign brightness in our Sign Lighting Laboratory and Showroom before making a lamp-choice decision.  The differences are dramatic.

Different LEDs for Different Uses

Every individual LED bulb is designed for a specific purpose.  As an example, the design of an LED for a flashlight is different from a LED designed for an LED electronic sign.  One is designed to focus all light straight ahead, the other to disperse its light evenly in all forward directions.

Significantly, almost all LEDs are not designed to meet a strict color-match.  Most back-lighting LEDs are designed to light a colored plastic.

Did you know that an LED that is superior at lighting channel letters with plastic faces is not the best choice to light a channel letter or sign cabinet with translucent vinyl or digitally printed graphics on a plastic or flexible sign face; or for creating the halo around a reverse-channel letter?

Most sign companies do not know this.  In fact, the wholesale suppliers that supply virtually all sign companies do not even carry use-targeted LED products.  For them, it’s “…one size fits all…”

We use SolarBrite ™ Color-Correct™ LEDs which are specifically designed for these use-targeted applications.  Their light output has a color-corrected wave length; superior for lighting translucent colors from behind.

We always use the proper LED to give our customers the best sign possible…Guaranteed.

Please stop by and see all of these products displayed in our unique Sign Lighting Laboratory and Display Showroom.

FOR ORDERING OR ASSISTANCE CALL:

214-339-2227 254-582-7446 817-861-1234 903-561-5959 940-365-3433 972-850-3300

877-SINCE79 toll free

Business Hours
Office: 7:00am to 5:00pm (CST) Monday thru Friday
Showroom/Tours: 7:00am to 5:00pm (CST) Monday thru Friday (or by appointment)

Privacy Policy

Copyright© 1979-2024 Signs Manufacturing Corporation - ALL RIGHTS RESERVED