DFW's Largest Custom Sign Company

Protective Coatings for Pole Sign
 and Pylon Sign Faces

SolarGuard^™ Plastic Protection for a Longer Lasting Sign

"Why are your colors so rich, so vibrant? I've never seen a printed face look that good!"

Force Communications, a local competitor

Pole or pylon plastic sign faces that don’t fade or “yellow” for 5 years because of internal UV protection is a step in the right direction, but your sign needs to look nearly as good 25 years from now as it looks the day it is installed; or you need to plan to replace it often so that your potential customers do not get the wrong impression of your business.

The longevity and appearance of plastic face materials and graphics are extended when they are coated with SolarGuard™, a special, clear, high-gloss, mar-resistant topcoat which protects plastics from ultraviolet light and ozone so that they last longer, just like your eyeglasses have UV coatings to protect the plastic lens.

• UV Protection +
• Ozone Protection
• Virtually Eliminates Plastic's Fading
• Crystal-Clear

Signs Manufacturing™ is an authorized SolarGuard™ applicator.

You won’t have dull, dingy plastic faces on your sign if we manufactured it.

Signs Manufacturing™ adds SolarGuard™ protection to every plastic-faced sign.  

We began applying SolarGuard™ over 25 years ago.  We have NEVER replaced a sign face due to fading!

Does SolarGuard™ Protection Work?  The face on the right was made of “generic” red acrylic and black trim-cap.  The left half was coated with SolarGuard™ and the face was left outside for ONLY 7 years; your sign will be out there much longer!

Picture of protected vs. unprotected vinyl lettering left outside for 7 years.

(This product does not come from the traditional sign industry.  Few sign companies know about it, or where to get it.)

Electronic Message Center faces that were NOT protected with SolarGuard™ (Click on each picture to enlarge.)

Just as coated lenses in binoculars increase the light gathering ability of the lens, the special Lumabrite™ crystal clear coatings we use increase the brightness of our plastic-faced signs.

Also, Lumabrite™ reduces maintenance because of built-in self-cleaning properties.

As an added bonus Lumabrite™ also makes the sign face(s) more reflective when the sign is not lighted!

This products inspiration was for the plastic lens industry.

• Self-Cleaning
• Mar-Resistant

Our people are factory-trained in the application of Lumabrite™.

Signs Manufacturing™ adds Lumabrite™ crystal clear coatings to every plastic-faced sign.

Flexible sign faces that don’t fade, rot, split, or mildew for 7 years is a step in the right direction, but your sign needs to look nearly as good 20 years from now as it looks the day it is installed; or you need to plan to replace it often so that your potential customers do not get the wrong impression of your business.

The lifetime of flexible sign faces and graphics, as well as their appearance, is extended when protected with a clear, high-gloss, mar-resistant OptiGard™ topcoat which protects plastics from ultraviolet light and ozone so that they last longer, and reduces maintenance because of built-in self-cleaning properties.

• UV Protection +
• Ozone Protection
• Virtually Eliminates Plastic's Fading
• Crystal-Clear

Signs Manufacturing™ is the only factory-authorized OptiGard™ source in Northeast Texas.

You won’t have dull, dingy, dirty faces like the sign on the right if we manufactured it.

Signs Manufacturing™ adds OptiGard™ protection to every flexible-faced sign.

We've applied OptiGard™ for over 20 years now.  We have NEVER replaced a sign face due to "yellowing."

See the difference between protected and unprotected (yellowed) flexible sign faces?  This test material was left outside for 7 years.

(This product does not come from the traditional sign industry.  Few sign companies know about it, or where to get it.)

Nothing looks worse than a sign with its lettering peeling off.  To prevent this we overcoat your graphics with clear SolarGuard™ or OptiGard™ solar protection, depending on the material they are adhered to, so that they will last.

The unique clear coats Signs Manufacturing™ applies over vinyl lettering and graphics are also formulated to remove one remaining objection knowledgeable consumers have to the use of vinyl on sign faces.

• Vandal Resistant
• Graffiti Resistant
• Virtually Eliminates Graphics Fading
• Virtually Eliminates Vinyl Peeling & Cracking

We have all seen signs where vandals have peeled-off lettering to make the sign imply something else, or simply to deface them.

When your sign is vandalized it must be replaced so that it effectively represents your business; even if the sign is simply a listing of “Pool Rules.”

While it is probably “technically” possible to remove lettering and deface a sign we manufactured with SolarGuard™, OptiGard™ and/or Lumabrite™ protection we are not aware of anyone, ever, having done so.

Please stop by and see all of these products displayed in our unique Sign Lighting Laboratory and Display Showroom.

Are we sounding a false alarm that “…the sky is falling…” when we talk about Solarguard™, Lumabrite™ and OptiGard™?  Acadian Ambulance is having to replace their only-5-year-old $15,000+ signs, and their "highly-reputable" UL Listed, Texas Department of Licensing and Regulation (TDLR) licensed sign company that built them didn’t even last as long as the signs (for obvious reasons.)  The accompanying picture was sent to us by Acadian.  We're told the faces were originally green with a black fleur-de-lis.  Now the signs internal LED lighting can hardly light the faces and they are "all blotchy".  They say that their signs look bad both day and night.  Buy carefully.  ("Click" on the picture to enlarge.)

FOR ORDERING OR ASSISTANCE CALL:

214-339-2227 254-582-7446 817-861-1234 903-561-5959 940-365-3433 972-850-3300

877-SINCE79 toll free

Business Hours
Office: 7:00am to 5:00pm (CST) Monday thru Friday
Showroom/Tours: 7:00am to 5:00pm (CST) Monday thru Friday (or by appointment)

Privacy Policy

Copyright© 1979-2024 Signs Manufacturing Corporation - ALL RIGHTS RESERVED