Why are “Labeled and Listed" Signs Critical to You?

Virtually ALL cities, as well as the State of Texas, adopt the National Electric Code as law.

The National Electric Code (NEC) requires that for electrical, structural, and installation safety all electrical signs be "Labeled and Listed" (tested and labelled with an appropriate Listing Mark.) (Article 600.3)

Certification (testing and labeling) organizations acceptable in the USA to test to the multitude of Standards signs are required to meet are determined by OSHA.

For you the Listing Mark is insurance.  It means that the sign has been tested to insure that it is structurally and electrically safe, and will be installed properly.  You benefit from the knowledge that it is not solely us telling you that our signs are safe, this is what the testing laboratories and the US Government says also.  Listing also means that there was a reliable source of tested replacement parts (when the sign was manufactured.)

Will your sign be tested and approved for safe use in a Wet (Outdoor) location?  Not if it’s not Listed!

Underwriters Laboratories (“UL” Listing Mark) and Intertek (“ETL” Listing Mark – originally Edison Testing Laboratory founded by Thomas Edison) are the premier certification organizations and 80% of all things electrical are tested by them.  A third testing laboratory, Eurofins ("MET" Listing Mark) also has facilities in Texas.

If the sign you are purchasing does not have a ETL, UL, or MET Listing Mark label the sign is probably not legal to install, anywhere in Texas.   There are a few local city ordinance exceptions.

Buy carefully.

Intertek is over twice the size of UL, and has a greater global presence.  UL is the largest in the USA.  We have both companies test and apply Listing Marks to various signs.

Whether it's channel letters, a wall cabinet sign, a monument sign, pole or pylon signs, electronic message centers, video displays, neon or other electric signs Intertek and Underwriter’s Laboratory pose the toughest design, structural, electrical, and installation standards on the products they approve.

We are the 9th oldest UL Listed Manufacturer in North Texas.  (File #UXYT.E149959)

To see if a manufacturer is a UL Listed sign manufacturer go to ul.com and under "Looking for UL Certified Products?" click "Visit UL Product iQ today."  Register for free, then enter "UXYT" in the "Search" box for lighted signs, or "UYFS" for electronic signs.

There are many sign companies that pretend to be Listed, but are not!

Not all of our production is Listed; some specialty signs custom manufactured for clients are not able to be Listed because of their design, however most are.

Incidentally, ISO (International Organization of Standardization) Standards, such as ISO 9001, are NOT electrical Listings (similar to a UL or ETL Listing) that allow a sign to be installed in Texas.  That said, components in our electronic signs also meet ISO 9001, ISO 9001, ISO 14001, and RoHS standards.

Underwriter’s Laboratory, Eurofins, and Intertek do NOT judge the appearance, appeal, or the longevity of a product.  This is why our many years of experience serving international, national, regional and local customers, and our investment so that we can apply the knowledge we’ve gained, will give you a superior product which will impress your customers for years to come.

State Licensed Sign Installation and Sign Service

We are a full-service sign company.  We provide sign site surveys, sign permits, sign installation and sign maintenance services for electrical and non-electrical signs for our customers as well as other sign companies.  We provide this work in Dallas, Fort Worth (DFW), and ALL of North Texas and Northeast Texas.

State Sign and Electrical License Numbers:  TECL17503, TSCL18015, TSCL18016.

Our technicians are also Quality Certified Signs™ certified.   (Click the "Installation & Service" tab for details.)

We serve and have installed signs in the Texas cities of Addison, Aledo, Allen, Alvarado, Anna, Argyle, Arlington, Athens, Aubrey, Avalon, Azle, Balch Springs, Bedford, Benbrook, Blue Mound, Bonham, Briar, Bridgeport, Buckingham, Burleson, Caddo Mills, Canton, Carrollton, Cedar Hill, Celina, Cleburne, Cockrell Hill, Colleyville, The Colony, Combine, Coppell, Corsicana, Crandall, Crowley, Dallas, Dalworthington Gardens, Decatur, Denison, Denton, Desoto, D/FW Airport, Dido, Duncanville, Eagle Mountain Lake, Edgecliff, Ennis, Euless, Everman, Farmers Branch, Farmersville, Ferris, Flower Mound, Forest Hill, Forney, Fort Worth, Frisco, Gainesville, Garland, Glenn Heights, Granbury, Grand Prairie, Grapevine, Greenville, Gun Barrel City, Haltom City, Haslet, Highland Park, Hillsboro, Hudson Oaks, Hurst, Hutchins, Irving, Italy, Itasca, Jacksboro, Joshua, Justin, Kaufman, Keene, Keller, Kennedale, Kleberg, Krum, Lake Dallas, Lake Worth, Lakeside, Lancaster, Las Colinas, Lawson, Lewisville, Little Elm, Longview, Mansfield, Marshall, Maypearl, McKinney, Melissa, Mesquite, Midlothian, Milford, Mineral Wells, Mount Pleasant, Mount Vernon, Nevada, Newark, North Richland Hills, Ovilla, Palmer, Pantego, Paris, Parker County, Pelican Bay, Pittsburg, Plano, Ponder, Princeton, Prosper, Quinlan, Quitman, Red Oak, Rendon, Richardson, Richland Hills, Rice, River Oaks, Roanoke, Rockwall, Rowlett, Royse City, Sachse, Saginaw, Sansom Park, Sanger, Seagoville, Sherman, Silver Creek, Southlake, Springtown, Stephenville, Sulphur Springs, Sunnyvale, Terrell, Texarkana, Trophy Club, Tyler, University Park, Van Alstyne, Valley View, Watauga, Waxahachie, Weatherford, Wedgewood, Westlake, Weston, Westover Hills, Wheatland, White Settlement, Whitney, Wichita Falls, Willow Park, Wills Point, Wilmer, and Wylie.

ZIP Codes 75001 thru 76958.

Area Codes 214, 254, 430, 469, 682, 817, 903, 940, and 972.

Serving Collin, Cook, Dallas, Denton, Ellis, Fannin, Franklin, Grayson, Henderson, Hill, Hood, Hopkins, Hunt, Johnson, Kaufman, Lamar, Navarro, Parker, Rockwall, Somervell, Tarrant, Titus, Van Zandt, Wood, and Wise Counties in Texas.

We also have signs in 43 different states, and 6 other nations.

The Quality Certified Signs™ Difference – People You Can Trust

Quality Certified Signs™ is a training, certification, and continuing education program designed to train all sign company personnel to take better care of their customers utilizing knowledge-based performance.

Certifications are available in:

• OSHA 10 Certification
• Master Cabinet Maker
• UL Listed Sign Technician
• ETL Listed Sign Technician
• ESA Listed Sign Technician
• Certified Welding Technician
• Wall Sign Installation Technician
• Detached Sign Installation Technician
• Interior Sign Installation Technician
• Sign Service Technician
• Electronic Message Center Specialist
• Sign Mechanical Technician
• Rotating Sign Installation/Service Specialist
• High-Rise Installation/Service Specialist
• State Licensed Sign Electrician (Texas)
• Fluorescent Lighting Technician
• Neon Lighting Technician
• LED Lighting Technician
• HID Lighting Technician
• Incandescent Lighting Technician
• Sign Design Specialist
• Vinyl Application Technician
• Graphics Technician
• Painting Technician
• Quality Control Technician
• Crane Operator
• Vehicle Operator
• Fork Lift Operator
• CNC Equipment Operator

ALL our personnel are Quality Certified Signs™ qualified because we also want the job done right..

The organizations that assist in developing and monitoring Quality Certified Signs™ training programs:

			Radocy, Inc.		Self Improvement Systems
	Solar Finishes™

Using Our Website to Learn | The Knowledge Tree^™

Your sign forms that very important "first impression" your potential customer has of your business.  Your sign must always look nearly as good as it looked the day it was installed so that you don't give potential customers a worsening impression of your business as your sign ages.

An example of our dedication to helping our customers succeed is this website. It IS the definitive source on signage information, ranked by Alexa^® in the top 0.05% of ALL websites in the world, the top 0.01% in the USA!

We call our website The Knowledge Tree™.  Online since 1997, this website is full of information regarding signs. Our database to create it requires over 8,000 pages; more information than some "encyclopedias."

The website tells you how we manufacture our signage, and why.

Knowledge Tree™ links are on the left side of every page. For instance, click our "Types of Signs" button, then pick any of our products, and explore that page's tabs and discover how we make each sign to last; including the use of CNC manufacturing, rust-proof metal, structural-steel frames, high-end automotive paint, high-impact plastics, and most importantly, sophisticated protective coatings.

Go to our "About" page and select tabs to learn about the history of Signs Manufacturing, and many other subjects.

Unsure, or unconvinced about the importance of signage to the survival and success of a business?  Click our "About" page's "Importance of Signage" tab.

Please use and enjoy this 550+ page website with over 3,000 images, the largest information resource about signs on the internet, created so you can learn about all types of signs and how you can control their affect on your image and business.  Consider "bookmarking" our site as a "favorite" for easier reference later.

We believe that if you're a knowledgeable purchaser there's a real good chance you'll become our customer.

Literature