Commercial Flagpoles
Including Installation in Dallas / Fort Worth, Texas
Quality Flagpoles
Signs Manufacturing provides only the best quality flagpoles! We use clear anodized aluminum, external halyard flagpoles up to 80' overall height!
The problem with most flagpoles is that they are aluminum which will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation.
Our anodized flagpoles do not encounter this problem. The process of anodization actually creates a barrier on the external surface of the aluminum flagpole, thus eliminating the oxidation process. Because the aluminum is not exposed to the elements, it cannot oxidize.
The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we only provide anodized finish on all of our flagpoles.
By using one process for all of our products we SAVE YOU MONEY and make sure our customers have the best quality flagpole in the industry!
How Many Flagpole Sizes Are There?
We have a large variety of flagpole sizes to fit every business.
Commercial Flagpoles of all Sizes
Flagpole Features
Business Flagpole Installations
When you buy a flagpole from Signs Manufacturing you'll get the best type available on the market. We only provide clear anodized flagpoles because they do not oxidize over time which leads to discoloration. They also do not require special cleaning solutions, or constant maintenance.
You'll get the best on the market!
- All of our flagpoles include the halyard, accessories and fittings.
- All flagpoles have a gold anodized aluminum ornament on the top.
- Most of our flagpoles use a cast aluminum revolving truck pulley, although very large flagpoles have an internal stainless steel winch system with 1/8" stainless steel aircraft cabling.
- Cast aluminum pulleys are self lubricating.
- Cast aluminum cleats are used at the base for almost all flagpoles (very large flagpoles have a different setup).
- We use a solid braided polypropylene halyard.
- The flagpole is sectional in most cases. Only the smallest flagpoles are one-piece.
- The base will have a spun aluminum flash collar.
- The foundation sleeve is galvanized steel.
- Our flagpoles are Made in the USA!
- Our flagpoles carry a 5 Year Manufacturer Warranty.
- We additionally support our flagpoles with a 1 Year Installation Warranty.
- Our flagpoles come with a US flag of the appropriate size for the flagpole you purchase.
 Our flagpoles come with a gold anodized aluminum ornament at the top for decoration. |
 Cast aluminum revolving truck with pulley. |
 Solid braided polypropylene halyard. |
 Swivel flag snaps. |
 Vinyl snap covers. |
 Cast aluminum cleat with mounting screws. |
 Spun aluminum flash collar. |
 Galvanized steel foundation sleeve. |
In most cases our customers have us install the flagpoles. In that case, we will deliver the flagpole ourselves rather than have the pole shipped to your location. So you won't have to worry about receiving the delivery of a huge flagpole to your yard. We'll bring it, we'll dig the foundation, we'll set it up. We have all of the right equipment and knowledge to make this a turnkey job.
All you have to do is enjoy it!
If you don't know a lot about flagpoles, we do. We'll help you make the best decision to meet your needs.
Serving the Dallas/Fort Worth Metroplex and ALL of North Texas
-
7 State-licensed Installation/Service Crews with Fully Equipped Crane and Man-lift Trucks to 80' reach.
-
All Vehicles and Operators meet OSHA Mobile Crane Operator Safety Certification guidelines
-
Quality Certified Signs™ Trained Installation and Service Technicians.
-
OSHA 10 Certified. -
Insured, Bonded, Deposit Insurance.
-
$25,000,000 Worker's Compensation/Accident Insurance.
-
Over 100,000 Sign Installations (so far.)
-
Phones answered 24/7 In-house. During the day you'll immediately talk to a real person.
-
Daily phone-calls (or emails) if you are an off-site manager.
-
Radio-dispatched Service GPS traceable and Time-on-Job verifiable.
-
Uniformed Employees.
-
In-house Mason (Brick, Stone, Foundation Work.)
-
Better Business Bureau Accredited Business.
-
Inside & Outside Storage.
-
Permits & Variances (See "Permits" Tab to the Left) Our main Permit Technician is trained by the International Code Council (ICC), the group that trains all city employees in the area, and is in fact an ex city Permit Technician.
-
Site Surveys (See "Permits" Tab to the Left)
-
Engineering (See "Permits" Tab to the Left)
-
Project Management. (See "Project Management" Tab to the Left)
Signs Manufacturing and Maintenance Corporation is a "Veteran-Owned Small Business Enterprise."
The installation went very well! You have a great crew that was experienced and knew what they were doing. Everything went well ... Signs Manufacturing did a great job!
Record Town
Automatic Customer Schedule Updates
Unique to the industry, Signs Manufacturing has developed an automatic update system to keep our customers informed.
The #1 complaint we hear from customers, whether it is feedback for our services or complaints about another company, is lack of communication. We listened and developed a solution.
Our scheduling system will automatically inform our customers of the status of their project. You will always know:
- if we are waiting for any information from you,
- if the permits have been filed (and when),
- if the permits have been approved (and when),
- when the sign was put into production, and
- what our projected install or service date is.
We recognize that your sign is imperative to the success of your business. Not having your sign installed on time is disastrous! Our exclusive update system helps us (and you) avoid surprises and get them resolved while there's still time.
Ask your Representative how it works.
Thanks guys! The monument looks great ... very pleased.
Cadence Academy
Full-Service Sign Company (Permit Filing, Listed Manufacturing, State-Licensed Install and Sign Repair)
Please visit our four-building production “campus” consisting of two sets of joined buildings. (2002 satellite photo courtesy of Google Earth, 2018 commercial drone photo.)
Our Dallas signs Factory addresses are 4540, 4550, 4560, 4610 Mint Way, Dallas, Texas 75236.
Our Building #5 Installation & Service Annex address is 4424 Mint Way, Dallas, Texas 75236.
We install and service what we manufacture and sell. Just our Installation and Service Annex is larger than most other sign companies.
"Signs Manufacturing & (Maintenance) has a BuildZoom score of 127, which places them above 99% of 222,249 contractors (all contractors of all trades) in Texas." - BuildZoom
Literature
We believe we are the only sign company that offers informative literature on signage, our "Sign Buyer's Guide" series.
Our most popular Guides are:
52 Page Brochure
44 Page Brochure
40 Page Brochure
40 Page Brochure
40 Page Brochure
40 Page Brochure
Also Available
Also Available
 |
|
 |
104 Product Videos |
